MPOS Not powering on
MPOS Not Powering On or Charging – Troubleshooting Guide
Overview
If your Brunswick SYNC MPOS device fails to power on, does not appear to charge or becomes completely unresponsive, there are several troubleshooting steps that can be performed to identify and potentially resolve the issue.
These issues may be caused by a discharged or faulty battery, a charging dock issue or a fault with the MPOS unit itself.
Before contacting Bowling Vision Support, we recommend following the troubleshooting steps below.
Below is a diagram outlining the troubleshooting process, with each step explained in further detail.

Step 1 – Check the MPOS Charging Dock
The first step is to check whether the MPOS device has sufficient battery charge.
- Place the MPOS unit onto its appropriate charging dock.
- Ensure the charging dock is connected to a working power supply and switched on.
- Check that the MPOS is seated correctly within the charging dock.
- Leave the device charging for approximately 15–30 minutes.
- Attempt to power on the MPOS device.
If the MPOS powers on successfully, check that it is charging and operating normally.
If the device still does not power on, proceed to Step 2.
Step 2 – Check the Charging Contacts
If the MPOS does not appear to be charging, check the charging contacts on both the device and the charging dock.
- Remove the MPOS from its charging dock.
- Inspect the charging contacts for any visible dirt, debris or damage.
- If necessary, gently clean the accessible contacts using a dry, soft cloth.
- Place the MPOS back onto its charging dock.
- Check whether the device begins charging or powers on.
Do not use liquids or sharp objects when cleaning the charging contacts.
If the issue continues, proceed to Step 3.
Step 3 – Test Another Charging Dock (If Available)
If the MPOS still fails to charge or power on, attempt to use another compatible charging dock, if available.
- Remove the MPOS from its current charging dock.
- Locate another working MPOS charging dock.
- Place the affected MPOS onto the alternative dock.
- Allow the device time to charge.
- Attempt to power on the MPOS again.
If the MPOS successfully charges and powers on using another dock, this may indicate an issue with the original charging dock or its power supply.
If the device continues to fail, proceed to Step 4.
Step 4 – Exchange the MPOS Battery (If Available)
If the MPOS continues to fail after testing an alternative charging dock, the issue may be related to the device's battery.
If another compatible MPOS unit with a working, user-removable battery is available, try exchanging the battery.
- Ensure the MPOS is powered off and removed from its charging dock.
- Carefully remove the existing battery from the affected MPOS.
- Remove a compatible, known-working battery from another MPOS unit.
- Insert the working battery into the affected device.
- Attempt to power on the MPOS again.
If the MPOS powers on successfully with the replacement battery, this may indicate that the original battery is faulty and requires replacement.
Important: Do not attempt to remove or charge any battery showing signs of swelling, overheating or physical damage. Only exchange batteries that are designed to be removed by the user.
If the MPOS still fails to power on after exchanging the battery, proceed to Step 5.
Step 5 – Contact or Refer Back to Bowling Vision Support
If the MPOS continues to fail after completing the troubleshooting steps above, please contact our technical support team for further assistance.
Email: support@bowlingvision.com
WhatsApp: +44 7586 832088 (Message only)
Support Number: +44 330 122 0252
Please include:
- Your venue name and the affected MPOS serial number.
- Clear photographs of the MPOS unit, including any visible damage.
- A short video demonstrating the issue, including what happens when attempting to power on or charge the device.
- Confirmation of whether alternative charging docks and batteries have been tested.
- A brief description of the troubleshooting steps already attempted.
Providing this information will help our technical support team investigate the issue, identify any potential hardware faults and advise on the next steps.