Bumper Control Box - 2 lights showing both the up and down switches

These two lights on are showing both the up and down switches are activated, even though the bumpers are up/down.

Both the 'UP' Light and 'DOWN' Light are on simultaneously. This suggests a bad connection on one of these switches.

If the bumpers are down currently, then it would suggest an 'UP' switch fault. If the bumpers are up, then that would suggest a 'DOWN' switch fault.

These are the two switches, which one would be at fault.

Slightly adjust the magnets position in small movements and see if the light goes out on the bumper control box.

If the lights do not change, it’s also worth checking the connections where the external switch cables enter the bumper control box. Refer to the red circle in the image below for the location of this connection area.